70 series 110 / 410 / 510 sockets for specific applications solder tail quad-in-line sockets and staggered (zig-zag) strips are suitable for ic's with staggered double row dual-in-line type pin patterns. (e.g. nec, etc). double row staggered strips will also accommodate single-in- line zig-zag memory packages on high density boards. display sockets insertion characteristics: partially equipped dil and staggered strips: 4-finger standard quad-in-line and display sockets: 6-finger low force ordering information replace 9 x with required plating code, e.g. 410-9x-214-10-001 for a 5 m m sn pb / 0.75 m m au becomes 410-93-214-10-001 110-xx-314-10-001 fig. 1 110-xx-314-10-002 fig. 2 110-xx-316-10-003 fig. 3 partially equipped dil sockets insulator body dimensions see page 50 please consult for versions not shown 110-91-064-01-505 110-93-064-01-505 110-97-064-01-505 110-99-064-01-505 quad-in-line socket rockwell packages with 2.22 mm nominal row distance can also be inserted important: quad-in-line sockets require a pcb drilling pattern with 2.54 mm centerline distance 410-xx-214-10-001 left 410-xx-214-10-002 right 410-xx-216-10-001 left 410-xx-216-10-002 right 410-xx-220-10-001 left 410-xx-220-10-002 right 410-xx-224-10-001 left 410-xx-224-10-002 right 410-xx-228-10-001 left 410-xx-228-10-002 right staggered zig-zag strips not stackable a: 18.98 c: 4.94 not stackable 18.98 4.94 stackable 21.52 4.94 stackable 21.52 4.94 stackable 26.60 4.94 stackable 26.60 4.94 stackable 31.68 4.94 stackable 31.68 4.94 stackable 36.76 4.94 stackable 36.76 4.94 510-91-010-01-504101 fig. 1 510-97-010-01-504101 510-99-010-01-783101 510-91-018-01-504101 510-97-018-01-504101 fig. 2 510-99-018-01-783101 display sockets for 7 segment displays (1 or 2 digits) platings sleeve clip pin 91 5 m m sn pb 0.25 m m au 93 5 m m sn pb 0.75 m m au 97 5 m m sn pb goldflash 99 5 m m sn pb 5 m m sn pb fig. 1 fig. 3 fig. 2 002 right 001 left fig. 1 fig. 2
|
